Skip to content
DoorsEZDoorsEZBook online
DoorsEZDoorsEZ

Panels, rollers, hinges, seals

Dented panels, rollers and seals fixed in Orange County

A dented panel, a cracked hinge or a worn bottom seal does not always mean a new door. We replace single sections when a matching one is still made, swap worn rollers and hinges, fit new bottom seals, and give you a written price before work starts.

Red short raised-panel double garage door with dented, buckled lower sections on a two-story stucco building
  • Open 24/7 ยท a person answers

    Same-day on most repairs booked by 11 am.

  • Callback within 15 minutes

    Day or night, every day.

  • Written price first

    Nothing starts until you approve it.

  • CSLB Lic. #859029

    C-61 / D-28 ยท Verify on the CSLB website (opens in a new tab)

The short answer

The short answer

A dented panel can often be replaced on its own if the manufacturer still makes a matching section for your door's model, size and color. If not, we explain the options, including a new door. DoorsEZ also replaces worn rollers, cracked hinges and bottom seals, with a written price before any work begins.

Safety first

Do not remove the bottom section, the bottom brackets, or the rollers and hinges on the bottom section yourself. The bottom brackets hold the lift cables, which carry the springs' stored tension, and loosening them can release that tension suddenly and cause serious injury. If a dented section is rubbing the track or the door binds, stop using it and unplug the opener.

Signs you need this

  • A dent, crease or crack in one section after a bump from a car or a ball
  • The door binds or jumps at the same point every time it moves
  • Rollers that wobble, squeal or have chipped wheels
  • Hinges cracked around the screws, or with bent knuckles
  • Daylight, leaves or water getting in under the closed door
  • A bottom seal that is flattened, torn or missing pieces

What you get

What the work includes

  • Identification of the door's manufacturer, model and section design
  • Single-section replacement when a matching section is available
  • Roller replacement sized to your track
  • Hinge replacement by position on the door
  • Bottom seal and retainer replacement
  • Balance check and lubrication of moving parts
  • Reverse test when an opener is connected (California Health and Safety Code section 19890)

How it works

From your call to a working door

  1. Book or send details

    Book online or call (833) 366-7739. We call back within 15 minutes, day or night, and a dispatcher confirms a time window. If you know the door brand, tell us; it helps with section matching.

  2. Inspect and check parts

    The technician reads the model information on the door, checks whether a matching section is made, and inspects the rollers, hinges, seal, track and balance.

  3. Written price for each option

    You get a written price for the repair and, when a section is no longer made or several are damaged, for a new door. If a section has to be ordered, we tell you the expected lead time before you approve.

  4. Replace, balance and test

    We install the approved parts, check the balance, lubricate the moving parts and run the reverse test if an opener is connected.

Details

When one section can be replaced

Most residential garage doors are sectional: a stack of horizontal sections joined by hinges. When one section is dented or cracked, the question is whether the manufacturer still makes a matching section for your door's model, width, design, thickness and color. We install Clopay, Wayne Dalton and C.H.I. doors, and for those and other brands we start by reading the model information on the door and checking what is available.

If a matching section exists, replacing it is far less work than a new door. Two things to know before you approve. First, a new section on a door that has faced the afternoon sun for years in Anaheim or Cypress may not match the faded color of the others exactly, even in the same factory color. Second, the bottom section carries the cable brackets, so replacing it means handling cable tension, which is technician work.

If the section is no longer made, if several sections are damaged, or if the door is near the end of its life, a new door may be the better value. We say so plainly and write both prices. If you choose a new door, we check the opener first, because Health and Safety Code section 19892(c) does not allow a replacement door to be connected to an opener without battery backup.

Rollers and hinges: the parts that wear quietly

Each section rides on rollers at both edges, and hinges join the sections so the door can bend around the curve of the track. These parts move every time the door does, so they wear even when nothing looks broken.

Worn rollers lose their round shape or their bearings start to grind. The door wobbles in the track, gets louder, and makes the springs and the opener work harder. Cracked hinges let the sections flex at the joint, which can make the door bind at the same point on every trip. A hinge that has torn through the door skin around its screws also means the section itself needs a look.

We replace rollers to fit your track and replace hinges by their position on the door, since each row uses a numbered hinge size. Then we lubricate the moving parts and check the balance. The rollers in the bottom brackets sit under cable tension and are always handled by the technician. If noise is the main thing you notice, our noisy garage door page explains what each sound tends to mean.

Bottom seals and the gap under the door

The rubber or vinyl seal along the bottom edge keeps rain, dust, leaves and insects out of the garage. Sun and heat harden it over time until it cracks or flattens and stops sealing. Santa Ana winds in Orange County push dust and dry leaves through any gap that is left.

Bottom seals come in several shapes, such as T-style, bulb and J-type, and each fits a particular retainer channel on the door's bottom edge. We match the new seal to your retainer. If the retainer itself is bent or corroded, we replace it too, so the seal holds its shape.

A new seal fixes gaps caused by a worn seal. It cannot fully close a gap caused by a sloped or cracked garage floor. If we see that, we tell you before you approve, so you know what the seal will and will not do. The weather stripping along the sides and top of the door frame is a separate part; ask the technician to check it on the same visit.

Price

What affects the cost

The written price depends on whether a matching section is still made for your door, the door's size, design, color and insulation, how many rollers, hinges or seals need replacing, and whether the track or opener was affected too. Section orders can add a lead time, which we tell you before you approve. The full price, including every mandatory fee, is written down and nothing starts until you approve it.

How our pricing works

Questions

Panels and hardware questions

Still unsure? Call (833) 366-7739 and talk to a person.

Can you replace just one dented panel?

Often, yes, if the manufacturer still makes a matching section for your door's model, size, design and color. The technician reads the model information on the door and tells you what is available before writing the price.

Will the new section match the rest of my door?

A matching section is made in the same design and factory color, but a door that has been in the sun for years may have faded, so the new section can look slightly different. We tell you this before you approve.

When is a new door the better choice?

When the section is no longer made, when several sections are damaged, or when the door is near the end of its life. We write a price for the repair and for a new door so you can compare. A new door cannot be connected to an opener without battery backup under Health and Safety Code section 19892(c).

How do I know my rollers or hinges are worn?

Listen for grinding or squealing, watch for the door wobbling in the track, and look for cracks around hinge screws. A door that catches at the same spot every trip often has a worn roller or cracked hinge at that point.

Do you replace bottom seals on any brand of door?

We match the seal to the retainer channel on your door's bottom edge, and replace the retainer if it is bent or corroded. The technician confirms the fit during the inspection and writes the price before any work starts.

Open 24/7 ยท a person answers

Talk to a person today

Book online or call (833) 366-7739. We call back within 15 minutes, day or night.